View HD74AC175_17690.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74AC175
Quad D-Type Flip-Flop
Description
The HD74AC175 is a high-speed quad D flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the D inputs is stored during the Low-toHigh clock transition. Both true and complemented outputs of each flip-flop are provided. A Master Reset input resets all flip-flops, independent of the Clock or D inputs, when Low.
Features
* * * * * Edge-Triggered D-Type Inputs Buffered Positive Edge-Triggered Clock Asynchronous Common Reset True and Complement Output Outputs Source/Sink 24 mA
HD74AC175
Pin Arrangement
MR 1 Q0 2 Q0 3 D0 4 D1 5 Q1 6 Q1 7 GND 8 (Top view)
16 VCC 15 Q3 14 Q3 13 D3 12 D2 11 Q2 10 Q2 9 CP
Logic Symbol
D0 CP
D1
D2
D3
MR Q0 Q0 Q1 Q1 Q2 Q2 Q3 Q3
Pin Names
D0 to D3 CP MR Q0 to Q3 Q0 to Q 3 Data Inputs Clock Pulse Input Master Reset Input True Outputs Complement Outputs
2
HD74AC175
Functional Description
The HD74AC175 consists of four edge-triggered D flip-flops with individual D inputs and Q and Q outputs. The Clock and Master Reset are common. The four flip-flops will store the state of their individual D inputs on the Low-to-High clock (CP) transition, causing individual Q and Q outputs to follow. A Low input on the Master Reset (MR) will force all Q outputs Low and Q outputs High independent of Clock or Data inputs. The HD74AC175 is useful for general logic applications where a common Master Reset and Clock are acceptable.
Truth Table
Inputs @ tn, MR = H Dn L H H: L: tn : t n + 1: Outputs @ tn+1 Qn L H High Voltage Level Low Voltage Level Bit Time before Clock Pulse Bit Time after Clock Pulse Qn H L
Logic Diagram
MR CP D3 D2 D1 D0
D
Q
D
Q
D
Q
D
Q
CP Q CD
CP Q CD
CP Q CD
CP Q CD
Q3 Q3
Q2 Q2
Q1 Q1
Q0 Q0
Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays.
3
HD74AC175
DC Characteristics (unless otherwise specified)
Item Maximum quiescent supply current Maximum quiescent supply current Symbol I CC I CC Max 80 8.0 Unit A A Condition VIN = VCC or ground, VCC = 5.5 V, Ta = Worst case VIN = VCC or ground, VCC = 5.5 V, Ta = 25C
AC Characteristics
Ta = +25C CL = 50 pF Item Maximum clock frequency Propagation delay CP to Qn or Qn Propagation delay CP to Qn or Qn Propagation delay MR to Qn Propagation delay MR to Q n Note: t PHL t PLH t PHL t PLH Symbol f max VCC (V)*1 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 3.3 5.0 Min 149 187 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Typ -- -- 9.5 7.0 8.5 6.0 7.5 5.5 8.5 6.0 Max -- -- 12.0 9.0 13.0 9.5 12.5 9.0 11.0 8.5 Ta = -40C to +85C CL = 50 pF Min 139 187 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max -- -- 13.5 9.5 14.5 10.5 13.5 10.0 12.5 9.5 ns ns ns ns Unit MHz
1. Voltage Range 3.3 is 3.3 V 0.3 V Voltage Range 5.0 is 5.0 V 0.5 V
4
HD74AC175
AC Operating Requirements
Ta = +25C CL = 50 pF Item Set-up time, HIGH or LOW Dn to CP Hold time, HIGH or LOW Dn to CP CP pulse width HIGH or LOW tw th Symbol t su VCC (V)*1 Typ 3.3 5.0 3.3 5.0 3.3 5.0 MR pulse width, LOW Recovery time MR to CP Note: tw 3.3 5.0 t rec 3.3 5.0 1. Voltage Range 3.3 is 3.3 V 0.3 V Voltage Range 5.0 is 5.0 V 0.5 V 2.0 1.0 0 0 2.5 2.0 2.5 2.0 -2.0 -1.0 Ta = -40C to +85C CL = 50 pF Guaranteed Minimum 4.5 3.0 1.0 1.0 4.5 3.5 4.5 3.5 0.0 0.0 4.5 3.0 1.0 1.0 4.5 3.5 5.0 3.5 0.0 0.0 ns ns ns ns Unit ns
Capacitance
Item Input capacitance Power dissipation capacitance Symbol CIN CPD Typ 4.5 45.0 Unit pF pF Condition VCC = 5.5 V VCC = 5.0 V
5
19.20 20.00 Max 16 9 7.40 Max 6.30
Unit: mm
1 1.3
1.11 Max
8
0.51 Min
2.54 Min 5.06 Max
7.62
2.54 0.25
0.48 0.10
0.25 - 0.05 0 - 15
Hitachi Code JEDEC EIAJ Weight (reference value)
+ 0.13
DP-16 Conforms Conforms 1.07 g
Unit: mm
10.06 10.5 Max 16 9
5.5
1
*0.22 0.05 0.20 0.04
8 0.80 Max
2.20 Max
0.20 7.80 + 0.30 -
1.15 0 - 8 0.70 0.20
1.27 *0.42 0.08 0.40 0.06
0.12 M
Hitachi Code JEDEC EIAJ Weight (reference value) FP-16DA -- Conforms 0.24 g
*Dimension including the plating thickness Base material dimension
0.10 0.10
0.15
Unit: mm
9.9 10.3 Max 16 9 3.95 1 1.27 0.635 Max 8
0.11 0.14 + 0.04 - 1.75 Max
*0.22 0.03 0.20 0.03
0.10 6.10 + 0.30 -
1.08 0 - 8
0.67 0.60 + 0.20 -
*0.42 0.08 0.40 0.06
0.15 0.25 M
*Dimension including the plating thickness Base material dimension
Hitachi Code JEDEC EIAJ Weight (reference value)
FP-16DN Conforms Conforms 0.15 g
Unit: mm
5.00 5.30 Max 16 9 4.40 1
0.08 *0.22 + 0.07 -
8 0.65 1.0 6.40 0.20 0 - 8 0.50 0.10
0.20 0.06
0.13 M 0.65 Max
*0.17 0.05 0.15 0.04
1.10 Max
0.10
0.07 +0.03 -0.04
*Dimension including the plating thickness Base material dimension
Hitachi Code JEDEC EIAJ Weight (reference value)
TTP-16DA -- -- 0.05 g
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.

▲Up To Search▲

Price & Availability of HD74AC175

	To Download HD74AC175 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .